Clean Room Bags
Food Grade Bags
High end food grade bags / Pharma Grade Bags
Type A bags are made of plain woven polypropylene and with non-conductive properties. These bags are used to transport non-flamable products. The user needs to make sure that there are no flammable solvents or gases present around the bulk bags.
Type B bags are also made of plain woven polypropylene and with non-conductive properties however these bags have a low breakdown voltage which does not generally exceed 6 kV. This is quite effective for the prevention of explosive dust-air mixtures from igniting. However, these bags cannot dissipate static electricity and hence cannot be termed as ‘anti-static’, these bags are used to transport dry, flammable powders. Type B do not have any interwoven materials with conductive properties thus the bags must only be used when there are no flammable solvents or gases present around the bulk bags.
Type C FIBCs also known as conductive FIBCs are made from non-conductive polypropylene fabrics interwoven with conducting threads sewn in a grid pattern, that connect the bag to ground via a grounding point. The connection to ground or earth during filling and discharging is very essential and critical to the safe and secure use of these bags. These bags are used to transport flammable powders and are safe to use when flammable vapors, combustable dusts or gases are present.
Type D bags are widely known as Dissipative bags and are made from material which is antistatic in nature. It is composed of antistatic and static dissipative threads. These bags are designed safely prevent from incendiary sparks, brush discharges and propagating brush discharges without the need for a connection from the bulk bag to ground. These bags are used to transport flammable powders and are safe to use when flammable vapors, combustable dusts or gases are present, however please do not use these bags if the surface of the bag is covered or contaminated with materials such as water or grease.
These bags are made of Woven Polypropylene and sometimes require PE liner inserted in the bags, these bags require higher safety factors and robustness as these bags are used in extreme transportation conditions and carry Hazardous goods.
The transport of dangerous goods is regulated in order to prevent injury to people, harm to the environment and material damages. We have a range of UN Bulk Bags designed and certified to contain and transport hazardous materials by Sea, Land and Rail in accordance with the UN International standards.
Degree of Danger
13 Flexible IBC for solids, filled or discharged by gravity (liquids and solids under pressure [>0.1 bar] are not permitted)
13H1 Woven PP fabric without coating or inner liner
13H2 Woven PP fabric, coated
13H3 Woven PP fabric with inner liner
13H4 Woven PP fabric, coated and with inner liner
Please Note: UN bags are not classified by safety factors they are classified by packing groups I, II or III. The term safety factor refers to FIBCs for non-dangerous goods.
Custom Built Bags based on our customer’s preferences
All the above bags are available in coated and uncoated fabric options.